Can I Use Latex Paint Over Latex Paint?

If you're wondering whether or non you can utilise oil-based paint over latex, information technology actually isn't a smart decision, just it is possible. The reason professionals advise against doing this is considering latex pigment is flexible in nature, and equally a result, oil-based paints won't properly adhere to them.

If information technology is not done properly, information technology makes a normal paint job have much longer.

Notwithstanding, if yous sand the surface and utilize a sealing coat such as primer betwixt the dissimilar layers, yous tin can go past applying oil-based paint over latex. Preparation is central. To successfully apply oil-based paint over latex, follow the steps below:

Step 1: Sand the surface

As previously mentioned, latex is flexible in nature. As a event, oil-based paint won't properly adhere to latex unless y'all sand the surface and add together primer between each of the layers. Showtime by equipping yourself with a piece of P80 grit sandpaper and try to remove as much of the latex from the surface.

You lot can also use a sanding block. By removing the latex from the surface, the oil-based paint will adhere much ameliorate than if the latex was left on. Brand sure you sand the surface downwards until y'all get a real matte look.

Step 2: Sand a little more than

You'll at present want employ 150 dust sandpaper and sand until you go a surface that'south extremely smoothen. After the surface has been completely sanded, wipe abroad the dust left backside with a damp towel or a clean cloth and let the surface to completely dry.

Step 3: Mask the area

Using a quality masking record, you'll want to mask annihilation you lot don't desire accidentally painted. This can include things like the edges of bordering walls, the edges of your cabinets, the edges of a light switch, and so on. Masking helps you go that really clean, sharp expect when you're finished painting and everything is fully dried.

Step 4: Utilise your primer

Yous have the option between a water-based or acrylic primer. Each of these primers work well and accept their pros and cons. Both h2o-based and acrylic primers create the perfect isolating surface. Subsequently you have applied the primer, and it's fully stale, you'll want to go ahead and employ a second glaze. It's important to brand sure you lot covered every single slice of latex possible.

Step 5: Utilise meridian coat

You'll demand a container of oil-based summit glaze. This can be purchased at well-nigh domicile comeback stores. After you have applied this solution, give it adequate time to dry, and if need exist, use another coat for superior coverage.

Footstep 6: Remove all the masking tape

It'due south best to remove all the masking record before the pigment fully dries. Removing the masking later the paint has fully stale tin can cause the pigment to tear, break, or scrap.

Tin can you lot paint latex over oil-based pigment?

Now that you know how employ oil-based paint to latex, the question remains. Can you paint latex over oil-based paint? The answer is aye, just the matter you haver to remember is, in one case you lot use latex over an oil-based pigment, the only way to remove it is to sand information technology off. That can become quite a nightmare, so make certain you get it right the first fourth dimension.

If you practise decide to utilise latex over an oil-based pigment, y'all'll also want to make sure you lot sand out any sleeky areas of the surface, and make certain you use 100% acrylic latex. It's too of import to note that the more you sand the surfaces, the better the acrylic paint will stick to them. To successfully paint latex over oil-based paint:

Step 1: Sand the surface

To ensure the surface is fully sanded, and make sure you don't encounter whatsoever sort of shine. You'll want to see more of a matte surface. This sanding should be washed with a 150 grit paper.

Footstep 2: Mask the surrounding area

To make sure you become sharp, clean-cut edges, mask the surrounding surface area with a quality masking tape. Remove the masking tape when you're washed painting and the paint is still moist. Like mentioned above, removing the masking tape when the paint has fully stale can chip, rip, or break the paint off.

Stride three: Use latex 'conversion' primer paint

Once the surface has been fully sanded, you lot'll want to employ a layer of latex 'conversion' primer pigment. Make sure yous give it adequate time to dry and you embrace all areas of the surface you're painting.

Footstep 4: Utilize your oil-based paint

Lastly, apply your oil-based paint and allow information technology dry out. When the latex 'conversion' primer and your oil-based paint mix, they allow your oil-based paint to adhere with no issues.