banner



How To Connect Tineco To Wifi

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner

Floor Ane S3SERIE
Smart Cordless Hard Floor Cleaner
Instruction Manual

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 1

The actual production may differ from the analogy.

Of import Condom Instructions

Salve THESE INSTRUCTIONS
Household apply only.
When using an electrical apparatus, bones precautions should always be followed, including the following:
READ ALL INSTRUCTIONS Before USING (THIS APPLIANCE). Failure to follow the warnings and instructions may event in electric shock, burn, and/or serious injury.

Alert – To reduce the risk of fire, electrical shock, or injury:
ane. Use only indoors, on non-carpeted flooring surfaces such as vinyl, tile, sealed wood, etc.
Be conscientious non to run over loose objects or edges of surface area rugs. Stalling the brush may result in premature belt failure.
2. Exercise not permit it to exist used every bit a toy. Close attention is necessary when used past or near children, pets, or lants.
3. Utilise only equally described in this manual. Use only the manufacturer'southward recommended attachments.
4. Practise not use a damaged cord or plug. If an apparatus has been dropped, damaged, left outdoors, dropped into water, or is not working equally it should render it to a service middle.
5. Do non handle chargers, including charger plug, and charger terminals with moisture hands.
6. Do not put any object into openings. Do not employ with any opening blocked; keep costless of dust, lint, hair, and anything that may reduce airflow.
7. Keep hair, loose clothing, fingers, and all parts of your body away from openings and moving parts.
eight. Use extra care when cleaning on stairs.
nine. Exercise not employ to selection up flammable or combustible liquids, such as gasoline, or employ in areas where they may exist present.
ten. Practice not pick up anything that is called-for or smoking, such as cigarettes, matches, or hot ashes.
xi. Do not use without a filter.
12. Foreclose unintentional activation. Ensure the switch is in the off-position before picking
upward or carrying the apparatus. Conveying the appliance with your finger on the switch or
energizing an apparatus that has the switch on invites accidents.
13. Always switch off the apparatus before making whatsoever adjustments, changing accessories, or storing the apparatus. Such preventive condom measures reduce the risk of starting the appliance accidentally.
14. Recharge only with the charger specified past Tinoco. A charger that is suitable for ane blazon of battery pack may create a risk of fire when used with some other battery pack.
15. Utilise appliances only with specifically designated Tineco bombardment packs. Use of any other battery packs may create a gamble of injury and burn.
16. Under abusive conditions, liquid may be ejected from the battery; avert contact. If contact accidentally occurs, flush with h2o. If liquid comes into eye contact, seek medical help. Liquid ejected from the battery may cause irritation or burns.
17. Exercise not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in burn down, explosion, or risk of injury.
18. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266°F (130°C) may crusade an explosion.
xix. Follow all charging instructions and practice not charge the battery pack or apparatus exterior of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
20. Have servicing performed past a qualified repair person using only identical replacement parts. This volition ensure that the prophylactic of the product is maintained.EN
21. Do not modify or effort to repair the appliance or the battery pack except as indicated in the instructions for use and care.
22. Always turn off this appliance earlier connecting or disconnecting the motorized nozzle.
23. Do non accuse or shop the appliance outdoors or inside the car. The simply charge, store or
utilize the bombardment in a dry out indoor surface area where the temperature is college than 39.2°F (iv°C)
just lower than 104°F (40°C). The charger is for indoor use only.
24. Practice not use to pick up ultrafine particles, such as lime, cement, sawdust, gypsum powder, or ashes.
25. Practise non utilize to pick up sharp objects, such as metallic nails, pieces of glass, metal paper clips, or pins.
26. Do non use to pick up hazardous fabric and chemicals, such as solvent, bleed cleaner, stiff acids, or strong brine.
27. Stop using immediately if the appliance is overheating, making unusual noises, producing unusual odors, performing depression suction, or leaks electricity.
28. Turn the cleaner OFF and disconnect from the electrical outlet for long-term storage.
29. Always make clean the Dirty Water Tank after each use to avert potential blockage, which may lead to low suction power, motor overheating, or reduce the service life of the appliance.
xxx. Store appropriately indoors in a dry place after use.
31. Do not place or submerge appliances in standing h2o or endeavour to make clean flooded areas.
32. All information and technical instructions of this manual are based on results from lab tests of Tineco or designated third parties. The visitor reserves all rights for final explanations.
33. Exercise not use the appliance when the water depth is more than 5mm above the surface.

Range of Usage

1. The cordless difficult floor cleaner is to be used on indoor hard floors, such equally vinyl, tile, sealed wood, etc. Use on a rough surface may not get the all-time performance.
ii. Keep your appliance abroad from oestrus sources, such every bit a fireplace or heater, to avoid causing deformation.
iii. Do non use to pick up flammable or flammable liquids, ultrafine particles, sharp objects, chancy material, chemicals, or anything that is called-for or smoking, as described higher up.

Nearly Cleaning Solution

1. A big amount of cleaning solution entering into the motor may cause impairment to the appliance.
ii. Add solution equally instructed in the Functioning section. We recommend using the provided cleaning solution. Do not employ the product with an acidic, alkaline solution, or any substances harmful to the surroundings.
3. Keep out of reach of children. If whatsoever solution gets into the optics, immediately flush them with clean h2o. If whatever solution is swallowed by accident, seek medical intendance immediately.
4. Dirty water and solution disposal should comply with local environmental regulations.

About the Apparatus

1. Practise non modify or attempt to repair the appliance except equally indicated in the instructions for operating and cleaning.
2. Accuse the apparatus with the Tineco adaptor. Input Voltage: AC 100-240V. Both high and low voltages can damage the adaptor, appliance, or fifty-fifty cause danger to the user.
3. Utilize actress care when cleaning on stairs.
4. Ensure that the Power Switch is in the OFF position earlier picking up or carrying the apparatus. Do not lay flat or lean the appliance then as to prevent muddy water from entering into the motor.
v. To avert being tripped accidentally, please put abroad the appliance on the charging base of operations.
half dozen. E'er install the Dirty H2o Tank and Clean Water Tank properly earlier use.
7. Exercise non allow the appliance or charger to get moisture to avoid the gamble of fire or injury caused by a short circuit.

FCC Supplier's Annunciation of Conformity

TINECO / FLOOR ONE S3 SERIES
This appliance complies with part 15 of the FCC Rules. Operation is bailiwick to the following two conditions:
(one) This apparatus may not cause harmful interference, and (2) this appliance must have any interference received, including interference that may cause undesired operation.
TINECO INTELLIGENT, INC.
1700 WESTLAKE AVENUE North., SUITE 200, SEATTLE, WA, 98109, United states of america
World wide web.TINECO.COM
1-855-292-8864

Changes or modifications not expressly approved by the political party responsible for compliance could void the user's authority to operate the equipment.
Notation: This equipment has been tested and found to comply with the limits for a Class B digital appliance,  pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency free energy and, if non installed and used in accordance with the instructions, may crusade harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does crusade harmful  interference to radio or television reception, which can be determined past turning the equipment off and on,  the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(ii) Increment the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radiations Exposure Statement

This equipment complies with FCC radiation exposure limits set along for an uncontrolled environs.
Note
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment, such modifications could void the user'southward potency to operate this equipment.

IC Note
This apparatus contains license-exempt transmitter(south)/receiver(southward) that comply with Innovation, Scientific discipline, and Economic Development Canada's license-exempt RSS(s). Operation is discipline to the post-obit 2 conditions:
(1) this appliance may not crusade interference.
(two) this apparatus must accept any interference, including interference that may cause undesired functioning of the apparatus.
-This Class B digital apparatus complies with Canadian ICES-003.
-This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should exist installed and operated with a minimum distance of 20cm between the radiator and any part of your torso.

Overview

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 2

A. Self-cleaning Button
B. AUTO/MAX
C. Power On/Off
D. Digital Brandish
E. Make clean Water Tank Release
F. Clean Water Tank Handle
G. Dirty H2o Tank Release
H. Dirty H2o Tank Handle
I. Brush Roller Comprehend Release
J. Tube
K. WiFi/Mute Button
L. Make clean Water Tank (CWT)
Chiliad. Dingy Water Tank (DWT)
N. Floater
O. Brush Roller Cover
P. Brush Roller
Q. Deodorizing & Cleaning Solution
R. 3-in-1 Cleaning Tool
S. HEPA Filter & HEPA Holder
T. Accessory Holder
U. Adaptor
5. Charging Base

Digital Display

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 3

A. Self-cleaning Icon
B. Brush Roller Tangled Indicator
C. Clay Monitoring Loop (Blue to red according to the clay amount)
F. CWT Empty
G. Power Indicator
H. Tineco Logo
I. WiFi Indicator
J. Battery Level Indicator
D. Machine Mode
Due east. DWT Full or Blocked

Accessories

Note:
Accessories may vary between markets. If you require other accessories, delight brand a purchase on the Tineco official website.

BUYBuy ONLINE- www.tineco.com– Products- parts and Accessories – Buy Now,

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 4

Deodorizing & Cleaning Solution
Removes dirt, grime, grease, and tough stains from near types of hard surfaces, similar tile, marble, sealed hardwood floors, and more.
Ever use the Tineco solution in your appliance.
Add i bottle cap of the solution to each total tank of make clean water.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 5

Brush Roller
A soft roller caput with bristles can be used to vacuum and wash at the same time. Information technology tin be hands cleaned with the self-cleaning role.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 6

three-in-one Cleaning Tool
A full brush to clean the DWT, brush sleeping room and opening. The tool too has a bristled end to remove clay and mud on the roller and DWT. The tool has a bladed stop to remove hair and debris that is wrapped around the roller.

Assembly

How to Assemble/Detach
Note: For h2o tank and brush assembly, please refer to "Performance" and "Maintenance".

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 7

To assemble the handle, insert it into the appliance until you hear a click.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 8

In the result that the product must be returned, please disassemble the handle. Press the spring to release the handle with a tool (like a screwdriver) and lift the released handle from the appliance.

Operation

Preparing for Utilize
Before first apply, please charge the appliance for 4±0.5 hours (refer to "Charging Instructions" for details).
* Based on results from Tineco lab tests. Lab temperature 39.two°F (four°C) ~ 104°F (40°C).

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 37

Press the button and the appliance will outset in AUTO style by default. Press it once again to turn off the appliance. Switch between Motorcar and MAX manner by  pressing the AUTO MAX push button.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 10

Do non recline the appliance more than 142° to protect against water leakage.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 11

Identify the appliance on the charging base vertically after utilize for recharge and storage.

Note:

  • Delight add a cleaning solution earlier utilize. If you decide to but use water, power on while the appliance is in an upright position, long-press AUTO MAX for three seconds. Selecting the appropriate fashion depending on the CWT contents is vital for maximum dirt detection effectiveness.
  •  Do not vacuum foamed liquid.
  •  To vacuum water left on the surface, the apparatus will switch off in iii seconds later power off.

Filling Clean Water Tank37

Press the Clean Water Tank release button to remove it from the apparatus.Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 14

Open up the tank cap, and fill it with tap h2o to the Max line. When deep cleaning is necessary, add together 1 canteen cap of the solution to the CWT and tightly close the cap.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 13
Notation: Only utilise water under 140F°/60C°.
DO Not USE HOT WATER. Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 14 Identify the tank back into the appliance. You should hear a "Click" if washed correctly.

Charging Instructions

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 15To charge the appliance, identify the appliance on the charging base of operations and plug the adaptor into a power outlet.

  1.  To charge the appliance, connect the external charging string to the charging base and plug information technology into the wall outlet.
  2.  To avoid tripping hazards, delight place the appliance on the charging base nearly a wall during charging.

Warning Alarm:

  • Only charge the appliance with the adaptor supplied by Tineco.
  • During long periods of not being used, the appliance must be charged one time every iii months for optimal performance. It may take iv±0.5 hours for a full charge.
  • Shop indoors in a dry out place. Practise non expose the appliance to sunlight or freezing temperatures.
    Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).

Cleaning Mode Selection

Auto Mode

  •  In Automobile way, the iLoop™ sensor automatically detects how dingy the floor is and applies the appropriate amount of detergent and suction power.
  •  A red clay monitoring loop indicates more dirt is detected, and a blueish loop indicates less dirt is detected. This mode automatically provides the best cleaning solution.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 21

AUTO

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 17

Clean: on Min Power

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 18

Vary depending on dirt amount

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 19

Heavy clay: on
Max Ability

MAX Manner

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 9 Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 21

  •  In AUTO mode, press the Auto/MAX push to enter MAX mode. The AUTO indicator on the display will turn off.
  •  In Max manner, the appliance will use max suction power and will spray water/solution  about220ml/min) for deeper cleaning.

Notation:
Keep sharp objects away from the digital display screen to avoid scratches and scrapes.

Runtime

  • When in Auto mode, the runtime is approximately 35 minutes. When MAX ability is used, the runtime is approximately 25 minutes.
  • Estimated runtime data was obtained past a Tineco Laboratory. Charging Fourth dimension A total accuse takes approximately four±0.5 hours.
  •  Estimated data was obtained by a Tineco Laboratory using ambient temperatures between 39.2°F (4°C) to 104°F (40°C).

Indicator
When in Use

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 22 Battery level ≥ 10%: battery indicator will be illuminated.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 23 Bombardment level < 10%: battery indicator volition be blinking.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 24 Off: no ability detected or possible bombardment malfunction.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 25 Blinking blood-red: dirt sensor malfunction or blocked.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 26 Indicator blinking: CWT is empty.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 27 Findicator blinking: DWT is full or channel has a blockage.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 28 Indicator blinking: castor roller is non installed or has a blockage.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 29 Illuminated: WiFi has successfully connected.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 30 Blinking: WiFi is connecting.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 31 Off: WiFi is not connected, please connect to the network.
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 33 Indicator blinking: apparatus is in need of self-cleaning.
During Charging
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 22 Tineco indicator: blinking.
Fully Charged
Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 35 In 5 minutes: Tineco indicator illuminated.
Later on 5 minutes: all indicator lights plough off.

App
All the functions can be performed using the Tineco app. Download the Tineco app from the App Store, Google Play, and Tineco Official Site.

65

Voice Prompt

Status Reminder
Battery level: 10~twenty% Low battery
Battery level: 0~10% Low battery, please charge
WiFi network continued Network connected
Clean H2o Tank is empty Clean Water Tank empty, please refill
Dingy Water Tank full or aqueduct blocked Clean the Muddied H2o Tank or the debris channel
Dirty Water Tank is full during cocky-cleaning Please install the brush roller correctly
Muddy sensor Shutting down
Castor roller is tangled Power off
Castor roller not installed Charging has commenced. Auto-detecting
Shutting down (takes 3s to close down) whether to run the self-cleaning cycle
Power is off Please begin the self-cleaning cycle
Start charging Please identify the apparatus on the charging base
Need cocky-cleaning Low bombardment, start charging
Appliance not on the charging base Offset self-cleaning
Bombardment insufficient for self-cleaning Cleaning castor roller
Sufficient battery to start self-cleaning Cleaning debris aqueduct
Cleaning brush roller Auto detecting
Cleaning droppings aqueduct Deep cleaning
Auto detecting Self-cleaning cycle complete. Please clean Muddied
Deep cleaning Water Tank

Maintenance

Annotation:

  • For optimal performance and to prevent odors, e'er make clean and dry DWT, floater, filters, pre-filter, brush roller, brush roller cover completely afterward each use.
  • Please make sure each office is installed correctly or the appliance may not work properly.
  •  Afterward maintenance, identify the appliance on the charging base vertically. Do not expose the appliance to direct sunlight, and store it indoors in a dry place.

Main BodyTineco Floor One S3 Smart Cordless Hard Floor Cleaner 20

To reduce the risk of injury, switch off before performing maintenance.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 38

Use a textile to make clean the surface with a neutral detergent. The cloth should be dry to forbid h2o from entering the appliance.

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 39

When LED loop blinking cerise, remove Dirty Water Tank, clean the clay sensor with a damp fabric or 3-in-1 cleaning tool.

Dingy H2o Tank

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 40

  • When dingy water reaches the Max line, the appliance will finish working and show a reminder on the brandish and play a voice prompt.
  •  Pull up the tank chapeau to empty the DWT. Use the 3-in-one cleaning tool to remove the remaining debris.
    Rinse the inside of the DWT and place it back into the appliance.

Filter & FloaterTineco Floor One S3 Smart Cordless Hard Floor Cleaner 41

If the filter and the floater have been blocked, rinse with h2o. Remove the filter from the tank lid, remove the floater, and rinse both parts with h2o.

HEPA Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 42 Grasp recessed expanse on each side of the HEPA and pull upward. Rinse nether running water and must be completely dry before recombining with the chapeau of the DWT.
*A spare HEPA is provided with your appliance for convenient replacement.

Castor Roller Cocky-cleaning

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 43.1. Place the appliance on the charging base after use, the sensor volition auto-notice the level of dirt.
2. When you hear the voice prompt "please begin the self-cleaning cycle," press the self-cleaning button and begin the process.
3. In one case complete, y'all will hear the voice prompt "self-cleaning completed, please clean the Dirty Water Tank." At this point, the apparatus will begin charging.
Note:

  • Ensure the charging base of operations is plugged in.
  •  Before the self-cleaning bike, please make clean the DWT and ensure the h2o level in the CWT exceeds twoscore%.

Brush Roller Encompass

Grab the front end handle while pressing the push and pull upward to remove information technology. Rinse with water. When replacing, always latch the brush embrace into identify to avoid leakage.
Brush Roller Remove the brush roller by grabbing the brush roller tab and pulling upward.diagram Remove the brush roller tab. Using the cleaning tool, remove the hair and debris wrapped around the roller and rinse with water. Replace the brush roller dorsum into the accessory holder, and allow it to dry completely before reinstalling. Remove hair and droppings from the brush roller sleeping accommodation and the opening with a tissue or a clammy cloth.Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 50 Supplant the castor roller by inserting the castor roller finish into the right side of the holder, then lock the pull tab into place by pressing downward.

Note:
A spare castor roller is provided with your appliance for convenient replacement.

Specifications

Production Floor 1 S3 SERIES
Charging Input 100~240V
Voltage 21.6V  4000mAh Panthera leo
Rated Ability 220W
Running Time AUTO: ~35 mins  MAX: ~25 mins
Charging Fourth dimension 4±0.v hrs
Water Menses Rate l~200ml/min
CWT Capacity 0.6L
DWT Chapters 0.5L
Waterproof012 IPX4

Troubleshooting

Trouble Possible cause Solution
The appliance does not turn on Auto protection for overheating Restart later cooling down
Weak suction The HEPA is non installed, or the HEPA is dirty Clean and dry out the pre-filter
Brush roller tangled indicator blinking 012Vocalism prompt:

1. Please clean the brush rollerTineco Floor One S3 Smart Cordless Hard Floor Cleaner 28

2. Please install the

brush roller correctly

1. The brush roller is blocked
2. The brush roller is non installed
one. Remove blockages
2. Install castor roller correctly
WiFi indicator is offTineco Floor One S3 Smart Cordless Hard Floor Cleaner 29 WiFi is not connected Follow the in-app guide to connect to WiFi
CWT empty indicator blinkingTineco Floor One S3 Smart Cordless Hard Floor Cleaner 26

012Voice prompt: Clean Water Tank empty, delight refill

CWT is empty Refill CWT
DWT full indicator blinking

012Vocalization prompt:Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 27 Dirty Water Tank full, please empty

The dirty h2o in DWT has reached the MAX line Empty the dirty water and then reinstall the DWT
All lights off in operationTineco Floor One S3 Smart Cordless Hard Floor Cleaner 24 Battery overheat or malfunction Absurd the apparatus downward and restart
Bombardment level indicator blinking

012Voice prompt: Low battery,32 please  charge

Depression battery Charge the apparatus, or restart
LED loop blinking blood-red

012Voice prompt: Please begin the cocky-cleaning cycleTineco Floor One S3 Smart Cordless Hard Floor Cleaner 25

Dirt sensor malfunction or blocked Remove blockages, clean the droppings channel, or restart
Cocky-cleaning icon blinkingTineco Floor One S3 Smart Cordless Hard Floor Cleaner 33 The brush roller is muddied  Commencement cocky-cleaning
Ability indicator blinking101 Motor malfunction Contact Customer Service

Note:
If the above troubleshooting guide fails to provide a solution, please contact us at
[email protected] eco . com or visit our website www.tineco.com for further back up.

Warranty

two-YEAR LIMITED WARRANTY

  • Only applies to purchases made from authorized retailers of Tineco.
  •  Is field of study to adherence to the requirements outlined in this instruction manual, and is subject area to farther weather outlined below.

WHAT IS COVERED?

  • Your Tineco appliance has a 2-year warranty confronting original defects in material and workmanship when used for individual household purposes in accord with the Tineco Instruction Manual. Motorized accessories and batteries bought separately come up with a 1-year warranty.
  • This warranty provides, at no extra cost to you lot, all labor and parts necessary to ensure your appliance
    is in proper operating condition during the warranty period.
  • This warranty will simply be valid if the appliance is used in the state in which it was sold.

WHAT IS NOT COVERED?
Tineco shall not be liable for costs, damages or repairs incurred as a result of:

  • Appliances purchased from an unauthorized dealer.
  • Careless operation or handling, misuse, abuse and/or lack of maintenance or use non in accordance with the Tineco Teaching Manual.
  • Utilize of the appliance other than for normal domestic purposes, e.k. for commercial or rental purposes.
  • Use of parts not in accord with the Tineco Instruction Manual.
  • Use of parts and accessories other than those produced or recommended by Tineco.
  • External factors unrelated to product quality and use, such every bit weather, modifications, accidents, electrical outages, power surges, or acts of God.
  •  Repairs or alterations carried out by unauthorized parties or agents.
  •  Failing to clear the blockage and other chancy material from the appliance.
  • Normal wear and tear, including normal wearing parts, such as clear bin, chugalug, filter, HEPA, brush bar, and ability cord (or where external damage or abuse is diagnosed), carpeting or floor damage due to apply not in accordance with manufacturer's instructions or failure to turn the brush bar off when necessary.
  • Reduction in battery discharge time due to battery age or use.

WARRANTY LIMITATIONS

  •  Whatever implied warranties relating to your apparatus including just non express to the warranty of merchantability or warranty of fitness for a particular purpose, are express to the duration of this warranty.
  •  Warranty coverage applies to the original possessor and to the original bombardment just and is not transferable.
  •  This limited warranty gives yous specific legal rights. Yous may also accept other rights which vary by region.
  • Manufacturer's warranties may not apply in all cases, depending on factors such as the apply of the product, where the product was purchased, or who you lot purchased the product from. Please review the warranty carefully, and contact the manufacturer if y'all have any questions.

WARRANTY SERVICE
Register: We highly recommend that upon purchase, you register your apparatus on the Tineco official website
(www.tineco.com/register) and enjoy sectional benefits. To annals, please enter the final 10 digits of the serial number (institute on the dorsum of the apparatus). Failure to register your production won't diminish your warranty rights.Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 51 How to Claim: Please retain your proof of purchase. To make a claim nether our Limited Warranty, you need to provide your serial number and the original purchase receipt with the purchase date and order number on it. All piece of work will be carried out by Tineco or its authorized agency. Any replaced lacking parts will become the property of Tineco. Service under this warranty will non extend the catamenia of this warranty.
If your appliance is not functioning properly, please electronic mail the states: [email protected]

Call our Client Service: 1-855-292-8864
Or email our Client Service: [email protected]
Visit Tineco Website:  www.tineco.com

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 53

Tineco Floor One S3 Smart Cordless Hard Floor Cleaner 54

http://www.tineco.com
Contact u.s.a. – We'll get back to you lot inside 1 business solar day.

001www.tineco.com
002 [electronic mail protected]
2021-06-23_1104591-855-292-8864
Mon. – Fri. 9am – 6pm (CST)

Documents / Resources

References

Source: https://manuals.plus/tineco/floor-one-s3-smart-cordless-hard-floor-cleaner-manual

0 Response to "How To Connect Tineco To Wifi"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel